Standard size for the cut out on a kitchen sink

[Iain]

I was wondering if anybody could possibly confirm if 35mm is the standard size for the cut out hole for a kitchen sink tap? Any help would be appreciated.

 

[richard978]

I was wondering if anybody could possibly confirm if 35mm is the standard size for the cut out hole for a kitchen sink tap? Any help would be appreciated.

Surely the sink has tap hole /s

 

[jtsplumbing]

Have you bought one of those small inset sinks ? photo would help, is it S/Steel or other material

 

[oz-plumber]

32mm - 38mm.
Depending on tap and whether or not it has a pull our vegie sprayer.

35mm should be ok for standard mixer.
Vegie sprayer ( pull out ) requires 38mm

 

[Darren Jackson]

Surely the sink has tap hole /s

Not all sinks come pre-drilled, and some taps fix onto the work surface so coring/drilling is necessary. But the size does vary depending on the tap. 35mm is average size. But I would not core a hole before having the tap on site just to be safe.

 

[Iain]

That's great, thanks for all the input.