I’m about to install a stone resin shower tray, the tray (RAK Feeling) comes with a warning not to use cement for setting on and instead recommends silicone or PU foam. A few questions;
Has anyone fitting this or a similar tray with PU foam? Or is best to use silicone? Which PU foam or silicone…
I’m setting the tray on jacko boards with a thin layer of SLC over the jacko board. The subfloor is 15mm osb and 22mm chipboard and not level 🤦♂️ hence screwing the jacko board at 300mm centres and wanting to put a thin layer of SLC. Any recommendations on the SCL to use? 3-4 mam thick and solid…
Any help appreciated
Dave
Has anyone fitting this or a similar tray with PU foam? Or is best to use silicone? Which PU foam or silicone…
I’m setting the tray on jacko boards with a thin layer of SLC over the jacko board. The subfloor is 15mm osb and 22mm chipboard and not level 🤦♂️ hence screwing the jacko board at 300mm centres and wanting to put a thin layer of SLC. Any recommendations on the SCL to use? 3-4 mam thick and solid…
Any help appreciated
Dave
