Suitable enamel to touch-up bath. | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Suitable enamel to touch-up bath.

Post thread

Discuss Suitable enamel to touch-up bath. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
T

The Bedwetter

Messages
126
I need to touch-up a tiny area of an enamel bath (about the size of a 20p coin). Is there any product available that I could obtain that would allow the bath to be used within a few hours of application? I have bought some EVERBUILD STICK 2 but this requires a 24hr period before being dry. I know Hammerite Smooth dries pretty quickly (even with more than 1 coat) but is this a suitable product in the circumstances?

Any advice greatly appreciated.
 
Chalked said:
Can't it jus be allowed a day to dry?
Click to expand...

Well if there is no product available then I will try to reschedule the work to such time where there is at least a 24hr window. Such a rearrangement is a bit difficult, currently, with my particular commitments.
 
Status
Not open for further replies.
Back
Top