Suprima 60 L | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter Sanke
  • Start date
  • Replies 5
  • Views 2K

Discuss Suprima 60 L in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
S

Sanke

Hi everyone
Got the above boiler heating HW on timer & CH continuous. From time to time the heating switches off & the red light on the boiler panel flashes. Once restart is pressed the boiler fires and heats up again
Any ideas as to what is causing the problem ???
Thanks :confused:
 
Dont know how old it is as the boiler was here when we moved in. How easy is it to renew the pcb ??
 
You are right werewolf wiring loom does need replacing also when replacing contol board on older models and are expensive,have seen alot of people jump in replace board then still going to lock out
Thats why I asked how old it is,it may be the newer model with amended pcb
I know the boards go on the old models,most would now have been replaced/repaired,however believe it of not there are other faults with this boiler,sticking gas valve/solinoid,air pressure switch.
Another point is everyone just replaces pcb boards,often problem just dry joints,if you go to a boiler around 5/6 years often that is the case
 
Last edited by a moderator:
Status
Not open for further replies.

Similar plumbing topics

Thanks Shaun! Never thought the timer could be...
Replies
2
Views
950
  • Locked
I would suggest you contact gas safe to report...
Replies
3
Views
657
76 Views and not one single "expert" has...
Replies
5
Views
668
Which model combi? Have you checked heating...
Replies
1
Views
777
C
I’m not posting here to agree to do/looking...
Replies
1
Views
848
Back
Top