Swirl Moderno Monobloc | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter Hessom
  • Start date
  • Replies 3
  • Views 7K

Discuss Swirl Moderno Monobloc in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
H

Hessom

Hello, I am now on my second Swirl Moderno Monobloc kitchen sink tap from Screwfix. The first one ran on emtying the swan neck after hot or cold tap was switched off. This drove the wife mad so I got a replacement off Screwfix and that is just the same. Once the swan neck is empty there are no more drips. Am I doing something wrong or is this a common problem? I am about to ask Screwfix for a different tap.
 
It's just the way they are. Get used to it or spend more on a tap!
 
I've got a similar problem with my swan neck, except it still drips after its empty. Must be an age thing.
 
If it keeps dripping long after being turned off it will be the valves at fault.
 
Status
Not open for further replies.

Similar plumbing topics

C
  • Question
Bristan is usually my first choice for taps...
Replies
2
Views
1K
  • Question
Thanks, will look for their single hole...
Replies
2
Views
931
Just unscrew the plastic pushfit elbow and...
Replies
3
Views
1K
  • Question
Just buy a tap from a reputable supplier /...
Replies
3
Views
924
  • Question
Thankyou, I have already installed a hot and...
Replies
13
Views
1K
Back
Top