Hi All,
My name is Mariusz. Im new to the forum and I can see already that I found a place for me. I'm working on a project bigger than I ever had and I'm planning my boiler room.
I have 3 storage house where first and second floor has 108m2 and loft around 60m2, where all will be UFH where manifolds have own pumps. I do also have there 7 bathrooms.
System also requires 7 towel rads and about 5 other rads.
I'm planning to install 2 Vaillant 630 system boilers and two 300 leters cylinders as well as low loss header where I was advice by Vaillant that WH40 is right for my two boilers.
Im looking for some information where I can taught myself and be able to calculate certain bits but it looks very complicated.
For example to size low loss header I would need to flow volume which I don't know how to figure out. I also would like to calculate my secondary pump where I think I'll need one.
Thanks for any advice
My name is Mariusz. Im new to the forum and I can see already that I found a place for me. I'm working on a project bigger than I ever had and I'm planning my boiler room.
I have 3 storage house where first and second floor has 108m2 and loft around 60m2, where all will be UFH where manifolds have own pumps. I do also have there 7 bathrooms.
System also requires 7 towel rads and about 5 other rads.
I'm planning to install 2 Vaillant 630 system boilers and two 300 leters cylinders as well as low loss header where I was advice by Vaillant that WH40 is right for my two boilers.
Im looking for some information where I can taught myself and be able to calculate certain bits but it looks very complicated.
For example to size low loss header I would need to flow volume which I don't know how to figure out. I also would like to calculate my secondary pump where I think I'll need one.
Thanks for any advice