Tall style concussive tap where to buy ? | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Tall style concussive tap where to buy ? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
86
Hi

Wondered if anyone had any recommendations for a new tap for my customer.

They currently have lever taps that are tall and look really nice but want concussive taps as someone left the tap running flooding the bathroom.

The pictures of the tap is below. I have thought about sensor taps but I’m not clued up on the electric side of things and not sure a battery one would be any good.

Let me know if you have any ideas.

Thanks.

21EED1AC-9674-4A0E-84E5-C084F6A5A40B.jpeg


4597E967-9387-4AE9-B5DE-4A3459FCC598.jpeg


1C4F9338-352D-4CDE-BC5A-FBEC863F1E47.jpeg
 
Ir activation
 
Hart-High-Spout-Self-Closing-Basin-Tap.jpg
Commercial-Series-Designer-Non-Concussive-Basin-Tap-ExtraReach.jpg


There are high neck and high spout non-concussives like the above available but they tend to be aimed at commercial customers for obvious reasons and so don't always meet the aesthetic requirements.
 
Why so bloomin complicated? Just put flow restrictors in the supplies so its combined input (centre position) is less than a free flow waste will take? Cheap, simple & keeps the look :rolleyes:

Let's face it it can never be used as a basin!
 
Why so bloomin complicated? Just put flow restrictors in the supplies so its combined input (centre position) is less than a free flow waste will take? Cheap, simple & keeps the look :rolleyes:

Let's face it it can never be used as a basin!

Think it’s more down to the taps being left on and wastage of water
 

Similar plumbing topics

Hello All- (Usual caveats apply: I am the...
Replies
0
Views
173
Just a guess, but you may find that the...
Replies
5
Views
2K
  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
982
  • Question
I have a really nice pair of old brass taps...
Replies
0
Views
879
I would call it installer error. Maybe from...
Replies
8
Views
1K
Back
Top