decided on a tapworks water softener. as some on here might know I have a 250l unvented hw cylinder and a missus that can quickly get through it. so at the moment im erring on the side of the ad11. ive noticed some come with a fitting kit. presumably I would need a high flow version, though the tank is fed from a 15mm.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
- Thread starter cypher007
- Start date
- Replies 1
- Views 2K
Discuss tapworks ad11 or ad9 and how to fit noob advice. in the Gaining Plumbing Experience area at Plumbers Forums
Similar plumbing topics
Mr Speaker: I'm tempted to draught a sarcastic...
- phill bri
- Central Heating Forum
- 22
- 4K
- Latest:
- Ric2013
From this post, I think you’ve got a good...
I have connected the secondary pump to a wifi...
- HRP123
- Gas Engineers Forum
- 9
- 2K
- Latest:
- HRP123
- Locked
Wilo pump is fine! Black water in system...
- wifflebat
- Plumbing Jobs | The Job-board
- 16
- 9K
- Latest:
- mike76
- Locked
Hi, and thanks for your reply.
Initially I...
- scottiecb19
- Central Heating Forum
- 2
- 753
- Latest:
- scottiecb19