Tee into existing Rad flow & return | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Tee into existing Rad flow & return in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
33
Hi to all.
I want to add another radiator in the through lounge as the existing radiator is stuck under the window at one end of what is quite a long lounge. One end never gets warm so I want to add a further radiator in what is this cold spot. Behind the wall I want to put the rad on is the kitchen radiator - is it possible to tee off the 15mm flow and return on this rad and put my rad on the other side of the wall? I have a sealed combi system and all radiators are fed from above. I can't take it off the 22mm feed above as it is under a fitted wardrobe!!
 
Status
Not open for further replies.

Similar plumbing topics

Pipework looks fine maybe try balancing the rads ?
Replies
3
Views
986
  • Question
How did you go about heating the extension in...
Replies
10
Views
3K
You seem to have got it sorted, but for future...
Replies
7
Views
945
Yes I’d do that too, just shut the radiator...
Replies
5
Views
788
  • Question
Yes providing the 15mm is going to only one...
Replies
1
Views
1K
Back
Top