The house that 100k built | Plumbing Jobs | The Job-board | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

The house that 100k built

Post thread

Discuss The house that 100k built in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Chalked

Chalked

Esteemed
Plumber
Gas Engineer
Messages
5,012
Just seen the bloke building the house cutting up a large flo gas LPG cylinder in half with a stone saw! Kaboom!
 
Chalked said:
Just seen the bloke building the house cutting up a large flo gas LPG cylinder in half with a stone saw! Kaboom!
Click to expand...

It didn't explode and they are fine to cut like he did once you zero them.
 
Light shades would of looked better if he'd cut them straight
 
I would have took them back to Flo-gas and got my £20 back, the house that 100k built, really it was 300k
 
Status
Not open for further replies.

Similar plumbing topics

M
Gas pressure drop with flow to a larger pipe from a smaller one?
More than fine then in 11/5 tube should be...
Replies
3
Views
629
ShaunCorbs
ShaunCorbs
C
Need e-mail or telephone assistance to help diagnose a heating issue
I’m not posting here to agree to do/looking...
Replies
1
Views
805
Timmy D
T
B
  • Question
Cold water storage tank overflow
Okay, so this shower is a potential route for...
Replies
4
Views
1K
Chuck
C
alex567
  • Question
heat pump and water cylinder installed away from the house, pros/cons
Tbh it’s a must for horizontal cylinders as...
Replies
10
Views
2K
ShaunCorbs
ShaunCorbs
R
  • Question
Can motorised valves go under floorboards (legally)?
Your first paragraph rings true. I tried to...
Replies
12
Views
2K
SimonG
SimonG
Back
Top