Thermal Store-Wood burner and Pellet boiler connection- Little advice please!!

[pcplumbing]

Hi hoping for a little bit of advice i am a plumber but have come to a little bit of mental block on plumbing up this.
I Have a five bathrooom house With 22kw of Radiators and 19kw underfloor heating. To connect to the cylinder the underfloor heating will need to be off a heat exchanger will one be ok to run 3 manifolds. the radiator heating is then needs to come of the cylinder so it can be fed by either heat source, but if we do that will have no radiators for heat loss from the wood burner. Any suggestions please. Thanks
Bamboozled plumber!!

 

[pcplumbing]

Can i run The wood stove directly into the cylinder and not into the loop and then off for radiators and have the biomass heating the loop up rather than the water directly

 

[PhoenixServices]

Can you draw out a diagram of what you are thinking of doing? Then post it to photo bucket or something like that. Makes life easier.

 

[Gray0689]

You take all heat sources in to thermal store and pull all heating out
Would need to know what sort of underfloor heating your using