I will be taking out my bath and putting a shower tray in. Under the bath there is a thermostatic mixer valve, I can't see ATM but pretty sure it's going to the bath taps, it is about 6 to 8 inches out of the floor boards so will be in the way, is it ok to cut it to floor board level'ish and cap it off.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
- Thread starter Jaykay22
- Start date
- Replies 2
- Views 645
-
- Tags
- mixer thermostatic valve
Discuss Thermostatic mixer valve in the Bathroom Advice area at Plumbers Forums
Similar plumbing topics
- Question
Thanks. I'll try to find a hard copy as I...
- Question
As above, and did you check the suitability of...
- Va_Dub
- Bathroom Advice
- 2
- 831
- Latest:
- Deleted member 120897
- Question
hi have been a plumber for 50 years this month...
- nicktf
- Bathroom Advice
- 1
- 787
- Latest:
- kwhkwh