Thoughts on quote of boiler replacement | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Thoughts on quote of boiler replacement in the Boilers area at Plumbers Forums

Messages
25
Hi guys, been quoted 1550 for direct replacement of baxi combi 105he with a baxi 830, I know the engineers.. So paying roughly 500 for Labour. What do you think? Plus this is with thermostat fitting etc. I thought about 1300/1400.
 
Tbh I would say that’s cheap but if you know the engy he might be helping you out

roughly the kit comes too around £11-1200 so around 300 labour

does that include a flush ?
 
Sounds cheap too me by the time you allow for pipe, fittings and all the consumables needed for a boiler swap
Does the gas need upgrading?
Will the system be flushed?
Lime fighter & shock arrestor needed?
Boiler plus controls?

Its all great trying to get the cheapest price but if its not fitted properly the warranty will be worthless
 
Tbh I would say that’s cheap but if you know the engy he might be helping you out

roughly the kit comes too around £11-1200 so around 300 labour

does that include a flush ?

Thanks Shaun, not sure if it does include a flush. I do the know engineers from work. He did say that they would usually charge 900 to fit.
[automerge]1581170440[/automerge]
Sounds cheap too me by the time you allow for pipe, fittings and all the consumables needed for a boiler swap
Does the gas need upgrading?
Will the system be flushed?
Lime fighter & shock arrestor needed?
Boiler plus controls?

Its all great trying to get the cheapest price but if its not fitted properly the warranty will be worthless

Thanks Scott, includes pipework, not sure about the other points you have mentioned. These are corghi registered engineers who carry out these works often.
[automerge]1581170470[/automerge]
Thanks Shaun, not sure if it does include a flush. I do the know engineers from work. He did say that they would usually charge 900 to fit.
[automerge]1581170440[/automerge]


Thanks Scott, includes pipework, not sure about the other points you have mentioned. These are corghi registered engineers who carry out these works often.
Gas Safe registered etc
 
There is no way anybody can do this for 1300/1400. The 1550 that you have been quoted is a bargain providing everything is done correctly so I would advise you to take that I doubt you will find anyone else to do it for that price
 
Too cheap, cutting corners somewhere.

Tail light warranty.

So how long should it take to replace a boiler? Like I said
There is no way anybody can do this for 1300/1400. The 1550 that you have been quoted is a bargain providing everything is done correctly so I would advise you to take that I doubt you will find anyone else to do it for that price

Thanks J, I do know them so they are doing it cheaper for me, he did actually say it would usually be about 1900/ 2000. Thought I'd check just in case with you guys that know. Thanks again.
 

Similar plumbing topics

This question has been discussed a couple of...
Replies
2
Views
797
Hi, approx. 2-3 hours.
Replies
2
Views
648
P
Tricky situation for you. Boiler shouldn't...
Replies
2
Views
435
I'm sorry it's been difficult reading. Is this...
2
Replies
37
Views
4K
Good job buddy. Rather than a beer, if you’re...
Replies
24
Views
3K
Back
Top