Thunderflush dual installation problem | UK Plumbers Forums | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Thunderflush dual installation problem

Post thread
Post reply

Discuss Thunderflush dual installation problem in the UK Plumbers Forums area at Plumbers Forums

A

Andy Thomson

I have just installed a Thunderflush dual flush cistern outlet valve. The unit sits to high for the lid and buttons to sit and engage as they should. I have adjusted the button height fully yet it is still about 8mm too high. What can be done?
 
Sort by date Sort by votes

Similar plumbing topics

B
  • Question
Weak flush - pneumatic button mech or flush valve?
You might check whether the flush button is...
Replies
1
Views
2K
Basher
B
damobolton
  • Question
Ideal Standard Dual Flush Cistern Overflow Problem
Thank you. Worked a treat,
Replies
2
Views
267
damobolton
damobolton
T
  • Question
PRV with Gauge Question
The flow is upwards through the PRV, it looks...
Replies
10
Views
303
John.g
J
O
  • Question
Two electrical supplies and a single immersion element
Except your response got me thinking. Going...
Replies
5
Views
438
onefff
O
BENNEJ0
  • Question
ideal standard dual flush valve problem
Just remove the cistern and do the job...
Replies
8
Views
1K
Ben-gee
B
Back
Top