Timer wiring installation | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Timer wiring installation in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Matty Birch

Gas Engineer
Messages
99
Hi guys need help wiring up a programmer to glowworm betacom ... usually have an electrician that charges me £40 but has today let me down, have done basic wiring before before never installed stats. Will attach a few photos and beg for guidance (manufacturers either arent clear or i cant look past the end of my nose)

Thanks in advance.

20180529_112152.jpg


20180529_112311.jpg
 
Make sure it complies with boiler plus or you have something else that does. Link live and common in the timer back plate and connect the RT on the green boiler block to terminal 3 in the back plate ( if it is a wiresless programmable stat )?
 
Pal,
If you can't understand what is required off the wiring diagram, get a sparks in.
As far as I can see, there are a couple of options available, depending on the thermostat requirements and the boiler requirements.
 
Pal,
If you can't understand what is required off the wiring diagram, get a sparks in.
As far as I can see, there are a couple of options available, depending on the thermostat requirements and the boiler requirements.
That’s why I asked what stat/timer it is mate
 
Looks like a Drayton backplate

I'm guess migeni
 
Be careful what you link to or you could blow the board ! 230 or volt free connection
 
Cheers guy for response lads ... its a drayton mitime ... will have a nest in in next few weeks (due a full rewire) but my usually sparkys have a good bank hol i think and isnt answering phone, comments really helped got there in the end my idea was to take rt to common live (dont ask lol) any decent wiring courses out there tou could reccomend? North west based
 
baxi 3 day wiring course

did you remove the 24v link?
 
Cheers guy for response lads . its a drayton mitime . will have a nest in in next few weeks (due a full rewire) but my usually sparkys have a good bank hol i think and isnt answering phone, comments really helped got there in the end my idea was to take rt to common live (dont ask lol) any decent wiring courses out there tou could reccomend? North west based
Danfoss or Honeywell both run good courses and hands on.
 
Status
Not open for further replies.

Similar plumbing topics

Hi folks, thought I's just close this out with...
Replies
19
Views
2K
Honeywell 6360 And yea 3 core cable from the...
Replies
1
Views
1K
  • Question
Here's an attachment of the PDF if people are...
Replies
1
Views
3K
I have the same problem with mine and I just...
Replies
8
Views
11K
Mini Wael
M
Basically sounds like nothing was set in stone...
Replies
21
Views
6K
Back
Top