J
jerry20
I have recently changed a old toilet ball valve(bottom entry) for a new bottom entry ball valve, the old ball valve was filling near the correct water level then slowing down and then trickling for about 10mins before shutting off. The costumer was having to remove the cistern lid and raise the arm on the ball valve manually everytime the toilet was used. I changed the old valve for a new one, virtually the same, hoping this would solve the problem but no, it still does exactly the same thing. Ive tried adjusting the flow restictors, tried different ball floats, adjusted the mains pressure and still the same thing is happening! I am at a loose end i dont know what else to try! surly a brand new ball valve shouldnt be doing this. Iv actually tried two of the same bottom entry valves thinking the first one was faulty....... HELP!!!!