Toilet Flush Handle Advice, Please

[The Shadowman]

I have concealed toilet cistern which has flush handle that goes through the inspection panel (my poor design). Because the spindle has to be fixed inside because of the lever arm I have to break the tiled inspection panel each time I need to inspect.

My question is: is it possible to obtain a flush handle that can be held in place with a little screw on the outside just like an ordinary door handle.

any other suggestions will be gratefully received.

Thank you in advance for your help

 

[rpm]

Why do you need to keep inspecting inside? If you keep re grouting then use silicone instead.

 

[The Shadowman]

Thanks for the reply

The inspection panel is tiled, and because the handle goes through it the tiles break. I don't. Have to keep inspecting. For example my inlet valve just packed up and to get the inspection panel off I had to break some tiles. I want to avoid this happening again when my new flushmaster needs a service

Thank again