K
kc1
I need to connect a WC to a horizontal soil pipe - the problem is that the centres are only 150mm apart from where the pipe enters the floor. I also need to connect the basin waste somewhere.
This connection is within a cabinet behind the WC, so have about 300mm depth to play with too - the pipes are close to the wall.
I have 2 possible ideas :
1. use a solvent weld T horizontally, and an elbow - but trim each socket down to about 20mm before gluing a 40mm bit of pipe between.
2. bring the existing soil pipe in higher up the wall completely above the WC connection, and then use a branch at the bottom mounted 45 degrees round (forward), with another 45 degree bend connecting to the WC. I think rotating 45 degrees will give me about 210mm between centres (if i've got my maths right).
Which would be better - or is there an entirely different way to do this?
I also need to find some way to connect the basin waste pipe - does anyone make a 90 degree 110mm bend with a boss for a 40mm pipe? - i can't find one anywhere.
This connection is within a cabinet behind the WC, so have about 300mm depth to play with too - the pipes are close to the wall.
I have 2 possible ideas :
1. use a solvent weld T horizontally, and an elbow - but trim each socket down to about 20mm before gluing a 40mm bit of pipe between.
2. bring the existing soil pipe in higher up the wall completely above the WC connection, and then use a branch at the bottom mounted 45 degrees round (forward), with another 45 degree bend connecting to the WC. I think rotating 45 degrees will give me about 210mm between centres (if i've got my maths right).
Which would be better - or is there an entirely different way to do this?
I also need to find some way to connect the basin waste pipe - does anyone make a 90 degree 110mm bend with a boss for a 40mm pipe? - i can't find one anywhere.
