Toilet plinth

[mutley racers]

I have a toilet which sits on an ugly mdf plinth which protrudes 2 inches around the base of the toilet. What's the best way to make a plinth? Wpb? And how do I make it look like part of the pan? Some pvc or something? I know some of you guys would have had to do this before.

Cheers fellers

 

[townfanjon]

God I bet that looks ***** . Obvious question , cant the pan go on the floor, I am guessing the outlet is too high.

 

[mutley racers]

Did look nasty. Yep, outlet too high

 

[stani]

You can actually buy plastic plinths to suit, how high does it need to be

 

[stani]

Is this what you need
http://www.akw-ltd.co.uk/product-listing/toilet-plinths/

 

[ShaunCorbs]

Is this what you need
http://www.akw-ltd.co.uk/product-listing/toilet-plinths/

only if it fits some dont but agree but not cheap either

 

[mutley racers]

About an inch but not really into buying one. Making one is a option I think. Would change the stack but it goes into a box that has been felted and goes through flashing into a roof. So not an option

 

[PETE 123]

Any good?

 

[stevetheplumber]

how long is the pipe comong out of the wall we often used to angle grind the soil pipe flus to the wall and that gets it low enough to use a long tailed pan con