Tool belt | Plumbing Tools | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Tool belt in the Plumbing Tools area at Plumbers Forums

PhoenixServices

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,031
Can anyone recommend a good tool belt. I just want it for holding a few bits while working on ladders/ scaffolding to save the endless journeys.
 
Had a massive makita one and it was tragic! 25year old leather town & country one

Only use one to hold fixings and your Irish screwdriver (estwing) tool belts stuffed with tools and tool vests scream novice spark or over indulged DIY
 
Last edited by a moderator:
Its something ive never owned is a tool belt although ive had occasions where ive thought i need a tool bag but have never got round to getting one, the leather / swade ones u see some joiners were look good and hard wearing and flat not to bulkey ,

[DLMURL="http://www.protecdirect.co.uk/Protec/Site-Equipment-%26-Consumables/Roadworks-%26-Equipment/Hand-Tools/Split-Leather-Double-Tool-Pouch/p/72921?utm_source=Protec&utm_medium=Froogle&utm_campaign=Shopping&gclid=CjkKEQjwqsCcBRDt7_Gts5a91YYBEiQAm-wYEXr-ha9FFVIA2DmixHgIh5wtM_g-zP01psa_O3jF_xbw_wcB"]Split Leather Double Tool Pouch | Hand Tools | Roadworks & Equipment | Site Equipment & Consumables | Protec | Protec Site[/DLMURL]
 
Last edited by a moderator:
I use a tool belt for 1st fixing
clips on left 15 22 28 screws slices and level on right impact driver on my right
hammer hangs in the middle of my lower back
and a snicker vest for mobile pen pencil and sharpy and tape in front right pocket

try to be as efficient with my time as posabile

also have a 12" long bit of 3" soil pipe that holds my map gas bottle bolted to the left
hand side of my steps

My tool belt is a hybrid of two different leather pouches think it's a CPA brand

really like the tough build pouches but not much pocket money at the min

all the best thanks for reading

Ohh also meet another trades man today with a veto told bag nice but lots of money
 
I use a tool belt for 1st fixing
clips on left 15 22 28 screws slices and level on right impact driver on my right
hammer hangs in the middle of my lower back
and a snicker vest for mobile pen pencil and sharpy and tape in front right pocket

try to be as efficient with my time as posabile

also have a 12" long bit of 3" soil pipe that holds my map gas bottle bolted to the left
hand side of my steps

My tool belt is a hybrid of two different leather pouches think it's a CPA brand

really like the tough build pouches but not much pocket money at the min

all the best thanks for reading

Ohh also meet another trades man today with a veto told bag nice but lots of money


Oh dear oh dear, by the time you've got dressed its time for coffee :)
 
I use a tool belt for 1st fixing
clips on left 15 22 28 screws slices and level on right impact driver on my right
hammer hangs in the middle of my lower back
and a snicker vest for mobile pen pencil and sharpy and tape in front right pocket

try to be as efficient with my time as posabile

also have a 12" long bit of 3" soil pipe that holds my map gas bottle bolted to the left
hand side of my steps

My tool belt is a hybrid of two different leather pouches think it's a CPA brand

really like the tough build pouches but not much pocket money at the min

all the best thanks for reading

Ohh also meet another trades man today with a veto told bag nice but lots of money

must look a bit like this mate......
 

Attachments

  • image.jpg
    image.jpg
    52.3 KB · Views: 45

Similar plumbing topics

D
  • Question
Has the world gone crazy, tool prices So, a...
Replies
0
Views
182
Dustydazzler
D
  • Question
I managed it in the end, and for anyone one...
Replies
1
Views
885
  • Question
Went with both options, my new bacho wide grip...
Replies
5
Views
1K
  • Question
Looks good
Replies
9
Views
2K
  • Question
Same here. There are times you just cannot...
Replies
13
Views
2K
Back
Top