torque wrench for service

[hellfire]

anyone use a torque wrench when replacing the gasket on burner door after service or repair if so what Nm settings do you use

 

[ShaunCorbs]

No but 6-7nm will do for most but each manufacturer has there own spec

 

[hellfire]

Thanks Shaun, cant find Nm settings in the manufactures services and repair section

 

[sammathias]

Thanks Shaun, cant find Nm settings in the manufactures services and repair section

what manufacturer?

 

[Last Plumber]

anyone use a torque wrench when replacing the gasket on burner door after service or repair if so what Nm settings do you use

No.
If you feel the need, Vaillant use 6Nm.