towel rail | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss towel rail in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
C

chalky

removed a radiator, fitted a towel rail on a combi system, opened valves and can not get hot water through towel rail, pressure ok return warm but feed cold and water is coming through feed pipe.Rest of radiators ok in house
 
possible air lock in the pipework, turn off all the other rads in the house except the towel rad to try n force the airlock out.
:cool:
 
will be a bit messy but.....

shut valves on new towel rad

open top left nut on rad, open right radvalve slowly and this will push air out as water will push from bottom right radvalve to top left nut

repeat other side

job done.
 
Turn the CH pump off when doing this or you could actually draw more air into the system.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
I do not believe that the end cap doesn't come...
Replies
7
Views
647
  • Question
With two issues following someone working on...
Replies
3
Views
500
As part of deep house renovation, planning to...
Replies
0
Views
917
  • Question
Good job buddy 👍🏼
Replies
11
Views
2K
B
Tricky to answer but your first call must be...
Replies
2
Views
563
Murdoch
M
Back
Top