TR2 Room Thermostat | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss TR2 Room Thermostat in the Gas Engineers Forum area at Plumbers Forums

Messages
1
I have an old room thermostat TR2 , was fitted by BG along with the RD532i combi boiler ( worcester bosch Benchmark type ), do i need to replace the thermostat for an exact same make & model ( TR2 ) or can I replace with a more accurate LED display type ?? ( new TR2 seem's to be approx £100 , expensive for a room stat ! )
 
No it doesn’t have to be like for like. Safely remove the cover of the thermostat 1st to check how many wires are inside, I’ve known them to be 2 wire, which you would be better suited to a 2 wire thermostat. This is to keep temperature swings at bay.

Please do not remove the cover on the boiler unless you’re a suitably qualified engineer (gas safe in the uk) as this forms part of the combustion circuit.
 
Honeywell 6360b as you might not have a neutral at the stat
 

Similar plumbing topics

C
Leave it on constant and control it via a...
Replies
2
Views
2K
F
Thanks Ray for that very helpful info, off to...
Replies
4
Views
1K
Frank Noton
F
E
I reckon if I did a survey of 100 heating...
Replies
0
Views
461
eco-heating options
E
  • Question
I wanted to bring this one to conclusion. My...
2
Replies
36
Views
3K
Glad to have helped! Yes, a condensing...
Replies
4
Views
4K
Back
Top