- Messages
- 587
Went to quote on a job last night where a bath was fitted few years back with no frame and only 3 of the metal feet actually connecting to the floor. Needless to say it's not been stable and the silicone seal around the edge failed and has been slow leaking water at good couple of years.
The bathroom is not in the best of states and floor board adjacent to the wall under the bath is missing meaning I could see 2 of the joist ends and they were sodden and it looks from the bit of access I have with bath still in place, like the very early stages of wet rot might have started.
I think the safest bet is to treat with something along the lines of Ronseal wet rot treatment/hardener either way to make sure there isn't a problem brewing under there once I reboard and sort the bath out.
Can you guys recommend any specific products to treat them or should the ronseal do the trick?
The bathroom is not in the best of states and floor board adjacent to the wall under the bath is missing meaning I could see 2 of the joist ends and they were sodden and it looks from the bit of access I have with bath still in place, like the very early stages of wet rot might have started.
I think the safest bet is to treat with something along the lines of Ronseal wet rot treatment/hardener either way to make sure there isn't a problem brewing under there once I reboard and sort the bath out.
Can you guys recommend any specific products to treat them or should the ronseal do the trick?