Trianco EuroStar 70/90 Blast tube removal Bayonet fitting | Oil and Solid Fuel Forum | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Trianco EuroStar 70/90 Blast tube removal Bayonet fitting

Post thread
Post reply

Discuss Trianco EuroStar 70/90 Blast tube removal Bayonet fitting in the Oil and Solid Fuel Forum area at Plumbers Forums

G

Graham George

Hi, I am trying to service a Trianco Eurostar 70/90 oil boiler but I just can not get the bayonet fitting blast tube to turn and release to gain access to the nozzle and electrodes. I have tried using Penetrating oil and a oil filter wrench to turn it, I have tried some heat and some tapping but its just solid. Any body got any ideas that dose not involve stripping the entire unit down and hitting it with a big hammer and hope the electrodes survive.
 
Back
Top