Trianco tro mk3 what brand is the burner?

[Inverness]

hi guys, I removed a burner from the trianco tro it had 2 screws below the burner to keep it fitted. It had a danfoss pump on the right hand side face on and the control box on the left face, the blast tube above is a case that's opens up and the fan is in side. The fan adjustment is by a flat head screwdriver, there is no make or model and it's bare metal. Any ideas? I looked on the trianco website Andrew there is no burner matching it.

 

[Tea-Break]

Sounds like the original Inter 99. Picture would confirm. What Output is the boiler?
An EOGB X400 should fit with no worries.
It will of course, require commissioning.

 

[Tea-Break]

Hi Again,
A Sterling ST40 should also fit. To confirm measure clearance from combustion chamber to front casing.

 

[Inverness]

Trianco tro 19/25kw Mark 3

 

[Inverness]

 

[Inverness]

Old burner but no identification?

 

[Tea-Break]

From your pics. It appears to be a Bentone B9.
My previous info still applies.

 

[Inverness]

Are you sure it's a bentone?. I'm only wanting to find out the spec of burner as it's annoying me plus so I know what nozzel it requires.

 

[Tea-Break]

I can’t be sure without seeing the burner from the front.
Nozzle size is determined by kW / BTU output of boiler.
TROs usually have a EH pattern. The exact size you can work out for yourself (see other postings on here)
If the current nozzle (size & pattern) has proven satisfactory, why not replace with like for like.

 

[Inverness]

Cheers, just in case the wrong nozzel has been replaced wrong in the past.

 

[SJB060685]

Electro Oil B9B?

 

[Best]

Looks like a B9 burner from the back for sure.
If it is, then the original oil pump will be a Danfoss BFP41L
and the motor will be 70 watt
Air box will be all plastic and fits in with 2 plastic lugs held with 2 Allen bolts and can easily partially block with dust