Hi,
Hopefully someone can shine a light on this!
I have a Triton Eden Concentric Mixer Shower (shown below). For some reason the temperature control becomes increasingly stiff as you turn to the cold range, and I need to "flick" it around with a bit of force to get colder water. This has been a problem since installation.
The unit is supplied by an unvented cylinder system which has a pressure reducing valve from the mains connection.
What could be the problem here?
Any leads would be appreciated. Many thanks in advance!!
Hopefully someone can shine a light on this!
I have a Triton Eden Concentric Mixer Shower (shown below). For some reason the temperature control becomes increasingly stiff as you turn to the cold range, and I need to "flick" it around with a bit of force to get colder water. This has been a problem since installation.
The unit is supplied by an unvented cylinder system which has a pressure reducing valve from the mains connection.
What could be the problem here?
Any leads would be appreciated. Many thanks in advance!!