Trouble finding replacement inset sink | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Trouble finding replacement inset sink in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
11
Hi there,

I have a customer with an old white (and stained) Astralite kitchen sink and drainer inset into a black granite worktop on an island unit. They want to replace it with a ceramic or stainless sink and drainer but the cut out is only about 800mm x 460mm (with curved corners) and I can't seem to find anything that small. The customer wants to avoid having to get the cut out enlarged due to the dust created if cut in situ or the risk of breakage if the worktop is removed for cutting.

Any ideas on if I can get anything to fit that size, or maybe there's company that could make a custom sized sink possibly?

Any ideas would be appreciated!

Thanks.
 
If it was cut with a hand misting spray being applied (like a pressurised garden sprayer) and the top kept wet would that not minimise the mess ?
 
I doubt very much you'll get exactly the same size,i always find i have to chop a bit here and there.Maybe best getting something very near and getting a stainless linen which don't scratch and stay new for years which should be the last sink for ages.possibly cutting the top with a 4.5 angle grinder with a water spray bottle,rarther you than me.
 
Last edited by a moderator:
Underslung sink? Franke make one thats maybe something to try, another one is getting the sink enamelled or painted, astralite - that's plastic init?

Keep looking mate and grinder versus granite - will you please post a video:D
 
Must admit angle grinding a granite top would be an entertaining but possibly rather over-long video.
 
I would get one of the stone companies to cut the granite for you as they are experienced in this.

White and coloured composite sinks are bad news. I don't think I've ever seen one which doesn't look manky. The only composite ones which look OK are the black ones.
 
Status
Not open for further replies.

Similar plumbing topics

S
  • Locked
The first time I was ever left on my own as an...
Replies
4
Views
3K
  • Locked
Try www.Stirlingdistribution sinks and...
Replies
3
Views
91
3
  • Locked
All three holes created in a different...
Replies
2
Views
4K
365drills
3
  • Locked
I think I differ from a few people here, if I...
Replies
8
Views
1K
secret squirrel
S
Back
Top