TRV Problem | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter tonell31
  • Start date
  • Replies 4
  • Views 3K

Discuss TRV Problem in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
T

tonell31

I removed a radiator on the weekend to decorate behind it, i closed both valves though the TRV was still leaking water (i was told to depress the pin and this would stop the water though the pin was not going down. )

so question is, is the TRV broken and should it be replaced or is this not the correct way to do this.?

also is there something i can put over the trv it stop it passing water?

thanks in advance for your reply

Tony
 
I removed a radiator on the weekend to decorate behind it, i closed both valves though the TRV was still leaking water (i was told to depress the pin and this would stop the water though the pin was not going down. )

so question is, is the TRV broken and should it be replaced or is this not the correct way to do this.?

also is there something i can put over the trv it stop it passing water?

thanks in advance for your reply

Tony
you can get plastic caps that screw ontop of the valve that depress the pin(there very stiff) but they often still weep,i always use brass blanking caps with a washer that screw onto the face of the valve,problem solved:cool:
 
trv they never shut .you need shut off cap supplied with valve to shut of properly
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Ok, thanks.
Replies
4
Views
787
A
Hi, I have a combi-boiler system and while I...
Replies
0
Views
436
Allan 1234
A
  • Question
Closing the loop... I replaced the valve body...
Replies
6
Views
2K
You seem to have got it sorted, but for future...
Replies
7
Views
1K
I will have to experiment like you said and...
Replies
6
Views
1K
Back
Top