Trying to source a smaller bath waste for an old cast iron bath

[MarkC1]

Hi, can anyone advise on where to get a replacement smaller unslotted waste for an old cast iron bath please? The existing waste appears to be 1 1/4 BSP, not 1 1/2 as you'd expect. I'm including some photos of the existing installed bath waste next to a new 1 1/2 BSP waste to show the difference.

The current waste flange is 73mm so i'm tempted to dismantle the waste and trap to see if its hiding a bigger hole that would fit a 1 1/2 waste but looking at the bottom of the tub the very old trap was left in place when the piping was last changed some time in the 90's / 00's by the previous owner; presumably it was left like this as a newer 1 1/2 BSP waste wouldn't go through the hole in the bathtub.

If anyone could shed some light on this it'd be much appreciated.

 

[snowhead]

They are about, use 1 1/4 chrome waste unslotted as the search term, don't put bath in the term

Unslotted Chrome Basin Waste with Plastic Plug & Chain - 74000640

Unslotted Chrome Basin Waste with Plastic Plug & Chain. A chrome basin waste with a conventional plastic plug and chain. Unslotted which makes it suitable for basins without an internal overflow

www.plumbers-mate-sales.co.uk

You may have to cut the threaded part down and file the end flat if you want to match to the existing trap or trap height.
And use a longer chain.

 

[cjg]

you just gotta love them lead wastes....... not!!!

 

[exedon2]

If your looking for a combined bath waste/overflow Mcalpine make a 1 1/4 version

 

[MarkC1]

Thanks all for the replies, thats really really helpful.

Looking around it seems the part with the biggest flange I can find is 61 mm, can anyone tell me please if it'll cause problems swapping out the 73mm one for a 61? I'm guessing it'll be OK, it'll just show a bit more of the recess.

And yes got to love the old pipe work thats been left in place! Whoever fitted the 1 1/2 plastic waste pipe that goes through the exterior wall to the 1 1/4 trap seems to have bonded it together, i've no idea how but that'll be getting replaced too at the same time.

 

[Ric2013]

you just gotta love them lead wastes.****** not!!!

No worse than coming across a plastic waste to connect to when you're trying to run a new lead waste