U16 gas rate measurement? | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

U16 gas rate measurement?

Post thread

Discuss U16 gas rate measurement? in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
G

GPS

Can any tell me if a 2min gas rate on a U16 (MDA16 metric) needs a different calculation please.... This is my 1st U16 and just in my limits as i'm only domestic....

Cheers in advance
Graham
 
There's no difference. Just take before and after and go as you would normally
 
Status
Not open for further replies.

Similar plumbing topics

I
Gas rates on lpg system?
No worries, I'll just use the app instead 🤪
Replies
2
Views
2K
Illuminate
I
C
Do I need a 2nd gas meter or will upgrade suffice?
On the basis that one opinion is good but two...
2
Replies
25
Views
7K
Cerendib
C
A
Is there any Gas safe engineer in Greater Manchester.
Yes
Replies
5
Views
858
ShaunCorbs
ShaunCorbs
M
Low gas rate on Worcester Greenstar Junior 28i
If you have the right temperature rise for the...
Replies
10
Views
3K
Last Plumber
Last Plumber
J
High meter operating pressure and low gas rate
Just do the same action again. Pot at Mac...
Replies
9
Views
2K
Phill K
Phill K
Back
Top