Hello my hearing pump failed over the weekend and a new Grundfos Ups3 was installed to replace Geundfos UPS 15-50. Hot water and central heating were reinstated however as soon as the UFH was turned on the downstairs radiators went cold but the UFH became warm. I have turned everything off and turned on each element one by one but as soon as the UFH is turned on, only the hot water cylinder and upstairs radiator work/receive hot water. Everything worked fine before the pump failed. Any suggestions please.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
- Thread starter DIYNovice
- Start date
- Replies 2
- Views 982
Discuss UFH trouble shooting in the Water Underfloor Heating Advice area at Plumbers Forums
- Messages
- 34,702
- Solutions
- 1
Try turning just the ufh heating on for a day constantly
Then re do the test the next day
Then re do the test the next day
Thank you I will try that and report back
Similar plumbing topics
Can't remember if you can get the UFH working...
- Zencap
- Water Underfloor Heating Advice
- 18
- 2K
- Latest:
- John.g
Behind the control panel the cylinder unit...
- lsnk12
- Water Underfloor Heating Advice
- 7
- 1K
- Latest:
- lsnk12
We’ve had a UFH system installed as part of...
- JSlippy
- Water Underfloor Heating Advice
- 0
- 2K
- Latest:
- JSlippy
Hi, this was a brilliantly explained post...
- Pilgrim Tim
- Water Underfloor Heating Advice
- 1
- 2K
- Latest:
- Smittybuns
Fitted the blue cap and keeps the valve...
- Kolash
- Water Underfloor Heating Advice
- 14
- 2K
- Latest:
- Kolash