Hi guys
I hope some bright spark out there can help me out
Basically I have been asked to take over from another plumber that has been booted off site. (Customers problem not the plumber).
He has part fitted a 20 m² speedfit pack [DLMURL="http://www.tradeonlyplumbing.co.uk/heating-hot-water/underfloor-heating/speedfit-packs/speedfit-single-room-underfloor-heating-20sq-metre.html"]Speedfit Single Room Underfloor Heating 20sq metre - Speedfit Packs - Underfloor Heating - Heating & Hot Water | Trade Only Plumbing & Heating Supplies[/DLMURL]. Pipework is all laid in screed and flow and return pipes come up in the cupboard with the boiler. Large cupboard plenty of room. The plumber has just teed off flow and return from the top of the boiler and has isolated these with lever valves. Customer wants this circuit to work individually from the rest of the heating system so is it just a case of adding a two port valve into the equation and then flow and return into the speed fit manifold and wiring it back to the boiler on its own wiring centre?
It's always a bit easier when you do your own thing from scratch so I'm not enjoying picking up this one.
Any advice would be appreciated
many thanks
matt
I hope some bright spark out there can help me out
Basically I have been asked to take over from another plumber that has been booted off site. (Customers problem not the plumber).
He has part fitted a 20 m² speedfit pack [DLMURL="http://www.tradeonlyplumbing.co.uk/heating-hot-water/underfloor-heating/speedfit-packs/speedfit-single-room-underfloor-heating-20sq-metre.html"]Speedfit Single Room Underfloor Heating 20sq metre - Speedfit Packs - Underfloor Heating - Heating & Hot Water | Trade Only Plumbing & Heating Supplies[/DLMURL]. Pipework is all laid in screed and flow and return pipes come up in the cupboard with the boiler. Large cupboard plenty of room. The plumber has just teed off flow and return from the top of the boiler and has isolated these with lever valves. Customer wants this circuit to work individually from the rest of the heating system so is it just a case of adding a two port valve into the equation and then flow and return into the speed fit manifold and wiring it back to the boiler on its own wiring centre?
It's always a bit easier when you do your own thing from scratch so I'm not enjoying picking up this one.
Any advice would be appreciated
many thanks
matt
Last edited by a moderator: