Underground heating pipes | Ground Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Underground heating pipes in the Ground Sourced Heat Pumps area at Plumbers Forums

Status
Not open for further replies.

Megaflo-Experts

Plumbers Arms member
Plumber
Gas Engineer
Messages
289
Can anyone recommend some pre-insulated pipe (or similar) to supply heating to an outbuilding about 20m away from the main house. The pipe will be buried in a underground trench, and therefore needs to be well insulated to avoid heating the ground!
I know Polypipe have a product with twin pipes within a larger pipe, which looks good, but is expensive at around £50/m.

Alternatively, is there a way to insulate and run standard Speedfit (or equivalent) to the outbuilding.
 
Ecoflex
Flex Allen
Rehau
They all make what you want but all expensive £40-£50 per metre
 
Have you had a look at Calpex pipe. If you literally want to put a dual pipe down all in one, it's the one to go for. It's expensive but very well made, insulated etc. it doesn't need a duct and can be put straight in a trench.
have used it many times in commercial settings. You just order d length you want and it's delivered on a coiled up.
 
DSCF6396.jpg4.jpg33.jpgas has been said, we use Rehau for all our underground pipework. There are two types, Ravitherm which is the same as Calpex (the inner carrier pipe is made by Rehau) will do the job but for better efficiency and far superior heatloss loss we use Rauthermex. It is more expensive and tbh for 20m i wouldnt waste the money on the extra cost. Also you will have to include the cost of tool hire as you have to use specific crimping tools.
 

Attachments

  • 20131101_122853.jpg
    20131101_122853.jpg
    100.2 KB · Views: 41
Last edited:
Thanks for all your helpful replies, an the photos missplumb.
I've read up on most of the products mentioned, and Uponor and Calpex sound good. I like Uponor as it doesnt require special tools or couplers.
I guess £50/m is the typical price, so the customer may be in for a shock!
 
Status
Not open for further replies.

Similar plumbing topics

Good suggestion as before rad removals they...
Replies
2
Views
2K
Current system Danesmoor utility installed in...
Replies
0
Views
2K
R
  • Question
You should see "attach files" like below.
Replies
4
Views
937
Thanks, I shall take a look in that case and...
Replies
21
Views
3K
Back
Top