Unused UFH port........... | Plumbing Jobs | The Job-board | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Unused UFH port...........

Post thread
Post reply

Discuss Unused UFH port........... in the Plumbing Jobs | The Job-board area at Plumbers Forums

P

plumbbobshan

Gas Engineer
Messages
77
Afternoon Lads and Lasses. I am setting up a 2 circuit UFH system the manifold has 3 ports. Do I blank off the spare ports or do I fit a loop and leave it turned off ? The other ports will be controlled with room stats.
 
Blank off or run something else off it eg summer towel rads
 

Similar plumbing topics

Scott_D
UFH and zone valves help?
I think its a room stat per UFH room zone
Replies
2
Views
733
Scott_D
Scott_D
B
Replace central heating gate valve with 2-port valve
In the end decided to follow Chuck’s advice...
Replies
11
Views
667
Barnjet
B
G
installing a wet ufh system from a 15mm CH leg
Personally at that size UFH I would want a...
Replies
2
Views
754
fowlerboi
F
M
  • Question
Connect air source heat pump to 2 UFH(unused)ports on a thermal store?
No as the temp wouldn’t get as hot as the...
Replies
1
Views
1K
ShaunCorbs
ShaunCorbs
T
Demand for Heating Not Firing Boiler
I don't believe moving the manual lever over...
Replies
5
Views
505
Basher
B
Back
Top