Unusual grohe deck mixer hose connection | Plumbing Jobs | The Job-board | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Unusual grohe deck mixer hose connection in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Jones82

Gas Engineer
Messages
221
Hi all

Struggling to find a new hose for this unusual union on a grohe deck mixer it almost looks like a outside tap hose lock, it’s not threaded at all, just a male spigot with an o-ring.




Thanks
 
Looks like it's a special grohe one but it looks like it might unscrew so you can install a standard connection
 
It looks like a grohe shower connection. I’ve seen one like that it had a 15mm chrome pipe connected to it.
 
There is a part missing that coverts the o-seal connection shown in the image to a standard
1/2’’ hose connection - suggest calling Grohe
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Take flow readings where ever you can. Just...
Replies
14
Views
2K
  • Question
Thankyou for your advise and help
Replies
18
Views
2K
  • Question
Looks like the original washer and washer seat...
Replies
2
Views
664
  • Question
Thanks for the advice all. Loctite 55 is on...
Replies
11
Views
1K
T
Replies
4
Views
3K
Back
Top