- Messages
- 2
Hi guys, just want to get advice, i want to replace venten to unvented cylinder, is it ok to install D2 pipe to toilet waste pipe see picture? as there is no easy options to get it outside.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
- Thread starter MPGASANDPLUMBING
- Start date
- Replies 2
- Views 377
Discuss Unvented cylinder D2 pipework installation to toilet waste pipe in the Boilers area at Plumbers Forums
- Messages
- 34,631
- Solutions
- 1
Yes fine aslong as it is waste and not an extractor fan vent
- Messages
- 4,850
This link will take you to the document required. See page 22 & 23. They explain D1 & D2 materials and termination points.
Similar plumbing topics
Thanks very much
Much appreciated
10 o’clock / 45 degrees would be better than...
Thanks Shaun and Last Plumber.
I checked the...
Well persevered, it is always worth the extra...
Would cap both off separately cut just below...
- jsoaks
- Boilers
- 1
- 430
- Latest:
- ShaunCorbs