- Messages
- 5
Good morning. First of all I say that I am not a professional plumber or anything like that,.I made a lid (a cover cnc aluminum) that I glued with a 5 cm
POLYSTYRENE and attached it with screws at the gas boiler for insulation and protection from frost . I bought a piece of rock wool that I put at the bottom where the water pipes are and i covered the bottom of the boiler. The top i did not cover it.
My point is because I put the piece of rock wool later I found that is harmful to health. They told me that in a long and prolonged exposure to dust there is an issue. We are talking about a piece of 50 to 60 points equally covering the tubes and the lower part as a blanket. There is a matter of health or a problem for the boiler? Anytime soon i will have a baby so i don't want anything to harm . The boiler is at the back balcony of the house.
Thanks in advance.
POLYSTYRENE and attached it with screws at the gas boiler for insulation and protection from frost . I bought a piece of rock wool that I put at the bottom where the water pipes are and i covered the bottom of the boiler. The top i did not cover it.
My point is because I put the piece of rock wool later I found that is harmful to health. They told me that in a long and prolonged exposure to dust there is an issue. We are talking about a piece of 50 to 60 points equally covering the tubes and the lower part as a blanket. There is a matter of health or a problem for the boiler? Anytime soon i will have a baby so i don't want anything to harm . The boiler is at the back balcony of the house.
Thanks in advance.