Vailant - how to lower heating output (kw) | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Vailant - how to lower heating output (kw) in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Luke Warm

Gas Engineer
Messages
16
Hey guys,

Really bugging me, my 32kw combi used to use about 25kw for the heating side and it would get up to temp so fast! I lowered it to 13kw on the boiler front controls, bit i cant remeber how i did it!!

So I've told a college of mine (we're all gas engineers) that i can do it and will tell him how! But i cant remeber how!!? Does anybody know? Or have the literature that says how to do it?

Thanks in advance.
 
Dont think its in the installation manual ((I might be wrong) but I had a copy of a techinical manual I was given when I attended a Vaillant corse and it did, I'I'll see if I can find it.
 
you are wrong. try diagnostics menu D.000 the instructions will tell you how to get there. hope this helps.
 
just to clarify i am a gas/heating engineer, im sure i can work it out i was just trying to save myself some time. heatservice you're right its on the technical sheet but i lost mine. My gas safe ID is 4091222 if you wanted to check. Cheers anyway
 
just to clarify i am a gas/heating engineer, im sure i can work it out i was just trying to save myself some time. heatservice you're right its on the technical sheet but i lost mine. My gas safe ID is 4091222 if you wanted to check. Cheers anyway
No worries @ShaunCorbs can you sort him the correct access out mate?
 
Can you see me now
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
How much heat do you want to transfer? Here...
Replies
3
Views
956
G
  • Locked
Granham, Its easy, just pull out the old sink...
Replies
11
Views
8K
B
  • Locked
Already knew about it! Another useful document...
Replies
3
Views
17K
F
  • Locked
depending on flush chemical used the acidic...
Replies
1
Views
4K
newbie1
N
  • Question
Re: Sludge flush failure DIY resolution (or...
Replies
24
Views
5K
Back
Top