vaillant eco tec plus 630 h systerm | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss vaillant eco tec plus 630 h systerm in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Chriswareham

Gas Engineer
Messages
66
boiler turning on when no call for heat. hot water or central heating all four motorized valves are shut down boiler heats to 60 + then goes in to recycling mode as it got to hot then some times it goes to f20 which is high limte cut out vaillant said to remove the 24v link (rs) but the boiler will not fire up after that?
re fit the link and on the disply it says it calling for heat when no call from the programer. its been working fine for the last 6 mounths.
thinking about it now i think that it has wired up wrong in the first place as its only been installed 7 mounths ago
there must be a live feed powering it up (but from were) more head scratching
 
yes fitted 8 mounths ago but cant find insaller gone on missing list was not regested with vaillant think working ok when port open but now they are shuting downheating boiler is sill igniling with now were to go.
 
That's odd! The boiler won't switch off with the 24v link fitted. Your boiler is going to high temps because the valves aren't opening.
It's wired wrong, and it's been working 8 months?
 
That's odd! The boiler won't switch off with the 24v link fitted. Your boiler is going to high temps because the valves aren't opening.
It's wired wrong, and it's been working 8 months?
 
it turns off if i remove the link but cant get it to turn on from thr programer ?if programer is turned offthe boiler heats up with no demand with no were to go starts to bang steam from air vent goes to f20
i am in agreament with you think it has been wired up worge sorry a bouth the spalling
 
it turns off if i remove the link but cant get it to turn on from thr programer ?if programer is turned offthe boiler heats up with no demand with no were to go starts to bang steam from air vent goes to f20
i am in agreament with you think it has been wired up worge sorry a bouth the spalling
 
Chris get a electrician in bud asap before you wreck your boiler , definitely wired wrong
 
Not just any old sparks, not all of them wire heating systems. Iff there's two motorised valves, it's an "s" plan. Be sure to ask if there conversant with these before booking them.
 
Check the voltage on 4 when programmer is off there should be nothing there.
 
Status
Not open for further replies.

Similar plumbing topics

well, I really cannot see what extra features...
Replies
10
Views
1K
  • Question
Have you got any updates on this?
Replies
1
Views
823
Hi, thanks for the reply, that did cross my...
Replies
2
Views
820
It could be, but could also be another wire...
Replies
10
Views
292
Burger
B
Hi, I have a TURBOMax Plus 828E in a small...
Replies
0
Views
879
Back
Top