Vaillant Ecotec F28

[Paul Fourmy]

Hi guys, I'm a qualified heating engineer having trouble with Ecotec plus 615 2008 model. It's sparking and my u gauge shows a drop in pressure so it appears the gas valves opening but it doesn't light. I've checked the electrodes, door seal, condensate, burner and flue which appear fine. I'm wondering whether the gas valve is causing a faulty gas/air mix?? Has anyone else had this issue?

 

[Sharp Point]

Hi guys, I'm a qualified heating engineer having trouble with Ecotec plus 615 2008 model. It's sparking and my u gauge shows a drop in pressure so it appears the gas valves opening but it doesn't light. I've checked the electrodes, door seal, condensate, burner and flue which appear fine. I'm wondering whether the gas valve is causing a faulty gas/air mix?? Has anyone else had this issue?

You’ll have to give your gas safe details and register pal. You won’t get boiler advice without it.

 

[Paul Fourmy]

You’ll have to give your gas safe details and register pal. You won’t get boiler advice without it.

I thought I'd already registered. I'll look again
[automerge]1565882420[/automerge]

I thought I'd already registered. I'll look again

I've just checked and it says I'm registered, perhaps I've missed something

 

[Sharp Point]

You’ll get a gsr icon if you are

 

[ShaunCorbs]

Get your post count upto 10 and then

Pm me with a pic of your gas safe card front and back

And I will get you in the next batch

 

[Burger]

I thought I'd already registered. I'll look again
[automerge]1565882420[/automerge]
I've just checked and it says I'm registered, perhaps I've missed something

If you are registered, you need more than 3 messages (10+ as per Shaun)

 

[Harvest Fields]

As above. We are very strict on this rule.