vaillant ecotec pro 28 diverter valve

[phil hair]

hi, does anybody know if i have to replace the whole cartridge or just change the o'rings on the original cartridge for the vaillant ecotec pro 28.
if i can get away with the o'rings do you know what size they are?

many thanks............phil

 

[rpm]

Does anybody know if a non gas safe registered person is allowed to do this?

 

[Harvest Fields]

Does anybody know if a non gas safe registered person is allowed to do this?

I would say that you should be GSR. If you are GSR then let one of the mods know and they will give you access to the area you need. If not get yourself a GSR in to do the work.

 

[phil hair]

i am, trying to find out how to do it, who are the mods?

 

[Harvest Fields]

Lou and Dan but for some reason I cannot attach the links to them.

 

[rpm]

Lou and Dan but for some reason I cannot attach the links to them.

Then > Members > Scroll down > Look to far right for a short list of Mods & Admin staff to contact.

 

[ShaunCorbs]

@Dan @Lou

 

[Harvest Fields]

Dan
This is what I get?

 

[Lou]

What's up?

 

[Harvest Fields]

i am, trying to find out how to do it, who are the mods?

Lou's link is now above this one.

 

[ShaunCorbs]

What's up?

Any chance you could move the thread to the gsr forum ?

 

[Lou]

Sorted

 

[Harvest Fields]

Thanks Lou.

 

[ShaunCorbs]

Normally just change the whole diverter easier and quicker than just doing the orings

 

[Harvest Fields]

And you have not got to do the whole process again once the diverter packs in completely.

 

[phil hair]

ok, sorted now, so can anybody help me

 

[ShaunCorbs]

ok, sorted now, so can anybody help me

post 14 and 15

 

[Harvest Fields]

As above