Vaillant F.22 error help

[Maresh]

Hello,

My vaillant is displaying th error code F.22.
I did some research and apparently it is necessary to increase the pressure but I don't know how to do it.

kind regards

 

[Frank Nicklin]

Kein Wasser means No Water. The water pressure needs to be in the green zone on the dial and between 1 and 2 bar. Pictures 2 and 3 are the gas meter you don't need to touch that. Its the water pressure that has dropped. There should be a fill loop from the mains water with a valve to open somewhere near the boiler.

 

[Maresh]

Thanks for your help but I don't know where it is, it's not in one of the pictures ?

 

[Frank Nicklin]

Thanks for your help but I don't know where it is, it's not in one of the pictures ?

Someone familiar with this boiler will have to help here. I think the centre valve is the filler but appears to be turned on. I have a feeling there is another valve to open somewhere to allow it to fill the boiler.
[automerge]1571066048[/automerge]
Have a look at the manual here.

https://www.vaillant.de › documents › download

Sorry just realised doesn't have filling instructions.

 

[EvilDrPorkChop]

Picture of directly underneath might help. It's badge up as an amtoTEC Plus but it looks loosely based on what Vaillant called a TurboMax Plus in the UK - on that particular boiler there was an integrated filling loop that you used a little Vaillant Key with underneath.

 

[ShaunCorbs]

You will need a flexi filling loop and your filling loop is just below your boiler the connections with the caps on

 

[SavageW]

Ain’t that the flow an return Shaun? From looking at the pics first LH pipe goes to diverter valve an far RH pipe is connected to the pump