Vaillant stand off kit instructions

[Scott_D]

Has anyone got a digital copy of these or do you know where to find them?
Not having any luck with Google and the Vaillant site.

:1eye:

 

[Ermintrude]

? It screws to wall and then the bracket for the boiler fixes to it?

 

[Scott_D]

Does it fix to the wall down each side or across the top/middle
Its to replace a boiler with balanced flue

 

[Whyme]

Theres a plate that screws to the wall, a bit wider than the normal one. your frame hangs on that + 2 screws either side at bottom. then boiler hangs on that. I usually find when replacing square flued boilers my new bracket lands were the big hole is. so i rip out, brick up then hang the next day.

 

[Destroyer2813]

Cut a thermolite block to size and put in with rapid set f cement then go do trv's while it sets

 

[Whyme]

i dont like fitting anything heavier than a picture on thermolite.let alone a boiler.

 

[Rickster123]

Cut a thermolite block to size and put in with rapid set f cement then go do trv's while it sets

No expanding foam?? Obviously I wouldnt use it but I'm told its great stuff!

 

[buckley plumb]

Vaillant rear piping spacing frame - Mr Central Heating

 

[Ermintrude]

No expanding foam?? Obviously I wouldnt use it but I'm told its great stuff!

I've blocked up fire places with the stuff. Lay Thermalite on it much stronger than cement

 

[lame plumber]

Cut a thermolite block to size and put in with rapid set f cement then go do trv's while it sets

then come back the next day pick it all off the floor and refill hole with bricks/concrete block then refit boiler back on wall

 

[GasmanxxxR1]

i dont like fitting anything heavier than a picture on thermolite.let alone a boiler.

Really? I fit boilers on it all the time. I cut the block so it wedges in the hole, cut it at an angle so it gets tighter as you knock it in. Plaster with a mix of sand cement and plaster. You could core drill it after 30 mins absolutely solid