vaillant | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss vaillant in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Paul
When you say jig do you mean the template for wall fixing, or a pre plumbing valve set jig.
The Vaillants that I have fitted have only come with a hanging bracket and not those poxy pre plumb thingys, where you have to juggle the washers on whilst hanging the boiler.
This is why I prefer to fit the Vaillants as it is less frustrating.
Graham
 
Last edited by a moderator:
nothing wrong with jigs in a tight space, get all your pipes connected and then pop in a boiler, simplessssssssssssssss, but takes a little practice, and you dont bang your head on the boiler putting in the pipes
 
Your right there Oldplumber, I often like to jig about in a tight space!!!
 
Paul
When you say jig do you mean the template for wall fixing, or a pre plumbing valve set jig.
The Vaillants that I have fitted have only come with a hanging bracket and not those poxy pre plumb thingys, where you have to juggle the washers on whilst hanging the boiler.
This is why I prefer to fit the Vaillants as it is less frustrating.
Graham

yes mate the pre plumbing jig like what the worcesters come with but question answered cheers
 
Status
Not open for further replies.

Similar plumbing topics

Who said plastic 28/22mm copper tube and mlcp...
Replies
3
Views
844
Assume a 25kw boiler with a minimum output of...
Replies
4
Views
1K
Thanks a lot for your help
Replies
5
Views
525
  • Question
£330 And tbh finding a good service engineer...
Replies
5
Views
840
Back
Top