- Messages
- 4
hi, I’m hoping someone can give some advice. My boiler keeps giving a error message of f75. I have replaced the expansion tank and it has been repressurised but what happens is the boiler will work then the red light comes on with error message the only way the boiler comes on is to send more water into the system which makes the pressure higher, the boiler will then work and it goes off again so the boiler ends up with the pressure being too high and I guess it discharges water out of the pressure release I fill it up again too high so the boiler works and round we go again. Anyone got any ideas? The tank is pressurized as I have done this a couple of times just to make sure! Thanks everyone