Valiant ecotec 831+ combi/ Honeywell wireless programmer | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Valiant ecotec 831+ combi/ Honeywell wireless programmer in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
1
I could do with advice in exactly what connection terminals to connect to on the 831 PCB, I'm OK regarding live neutral and earth from the programmers relay which is a bdr 91 but it's the switching part of connecting to the PCB I'm unsure of. ie do I connect to the 24volt after removing the link or would this send 240 volt AC through the pcb
 
Hi cliff7, you'll need to be Gas Safe Registered to be accessing the PCB so no advise can be given on this forum. One of the mods will be along shortly......
 
Just because you disagree with what you can do doesn't mean you need to breach forum rules :ban:
 
Status
Not open for further replies.

Similar plumbing topics

I'm going replace my Honeywell ST9400C and...
Replies
0
Views
2K
Thanks for the advice. Have removed the...
Replies
5
Views
3K
  • Locked
The Contactor is located in a plant room out...
Replies
11
Views
2K
L
  • Locked
They can be volt free of course but that is...
Replies
11
Views
5K
mountainman
M
Back
Top