Valliant Glow Worm Heater Exchange - Pro Therm 80e | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Valliant Glow Worm Heater Exchange - Pro Therm 80e in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
1
Hi Everyone,

Does anyone know if the heater exchange (0020025264) from a Valliant Glow Worm will fit into a Pro Therm 80e?

Thanks
Rob
 
Sorry Rob, we can't answer that on a public forum. If you are gas safe registered, get your post count up, forward a pic of the front and back of your gas safe card to one of the mods. Once confirmed we can then get you in the private forum so stuff like this can be spoke about freely.
Someone may also be able to pm you an answer to your query while your waiting.
 
As above good advice. Rob, I’m sure you can understand why we won’t give diy gas appliance advice
 

Similar plumbing topics

Ignore that air pressure sensor 🤦‍♂️
Replies
5
Views
603
P
The Glow worm is a little less than 50 db, not...
Replies
1
Views
1K
A
Thanks for that. And yes, time for an engineer!
Replies
2
Views
1K
Andy Don
A
No taps or showers have been replaced. We did...
Replies
2
Views
1K
I once had a similar experience with my old...
Replies
6
Views
856
Back
Top