Valve Manufacturer and dis-assembly | UK Plumbers Forums | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Valve Manufacturer and dis-assembly in the UK Plumbers Forums area at Plumbers Forums

Messages
2
Dear all

After moving home recentely im now in a house with a warm to say the least shower. All the hot water taps in the house give very hot water at maximum so im presuming a valve issue.

So i can research it further, i.e. removing to see if hot can be increased/ possible replacement, im struggling to identify it, see below. Any help on type or and fault diagnosis would be great. i havent yet worked out how to take the knobs off in the absence of any screws. Thanks in advance

20201014_165340 (1).jpg
 
Maybe a trevi valve

the Dome should come off / unscrew
 

Similar plumbing topics

A
  • Question
Our building has a boiler that provides both...
Replies
0
Views
762
arkay-eff
A
  • Question
Hi Ric - thanks you so much for taking time to...
Replies
4
Views
1K
I have a home with an oil boiler in a garage...
Replies
0
Views
693
  • Question
I agreed with this. Is the whole house not...
Replies
4
Views
2K
Back
Top