Variable water pressure on 3rd floor block of flats (built 2003) | Bathroom Advice | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Variable water pressure on 3rd floor block of flats (built 2003) in the Bathroom Advice area at Plumbers Forums

Messages
27
Hi...can you give me some advice please?. I have lived here for about a year and for the last month only have had severe problems with water pressure ,even the toilet cistern (ALL my water is fed from the mains and not from a tank). In a split second my pressure can go from strong to weak...and even to a trickle...a trickle has happened twice in the last 2 days I phoned thames water and they had no problems. I realise that my pressure will drop a bit when other flats are using their water...but this is more severe than that. A plumber who I met in the car park told me he had replaced a valve supplying one flat only (didn't need access). ...would this be a pressure regulator valve?..and does this mean one valve per each flat of 44?...and could a faulty valve be my problem?...AND could this fail completely leaving me without WATER!. There is a "pump room"?? on the ground floor. One tenant on the floor below me (2nd) has the same problem...I have yet to check with my same floor neighbours....if I call a housing association plumber and the pressure is good when he comes will he take my word for the problem...or will have to see low pressure before doing a repair?....many thanks for any advice received.
 
I would check in the pump room for your dedicated water main. You should have access to this if its your only isolation valve for your flat. It sounds as if its happened since a plumber carried out work so I check the isolation valve for your flat is fully open.
If you have no access o the pump room contact your housing associating.
 
Thanks for your advice. Since I posted my problem earlier today I phoned thames water again. They had no reported problems in my area and also said that because the water pressure was strong/normal on the ground floor (which it is) and is only affecting the upper floors (2nd/3rd)....therefore it is an internal building issue. I have spoken to my 2 nearest neighbours and they have the same problem. Therefore I phoned my housing association and told them what thames water said and they are going to send a plumber out to check the pump room. By the way i also told thames water that this low pressure problem has only occurred since a major fault at a thames water pumping station a few weeks ago, which resulted in E3 being without water. They said maybe the pump in my building needs to be reset etc.?...after such a major water failure in the area...regards Dimmy
 
Thanks for your advice. Since I posted my problem earlier today I phoned thames water again. They had no reported problems in my area and also said that because the water pressure was strong/normal on the ground floor (which it is) and is only affecting the upper floors (2nd/3rd)....therefore it is an internal building issue. I have spoken to my 2 nearest neighbours and they have the same problem. Therefore I phoned my housing association and told them what thames water said and they are going to send a plumber out to check the pump room. By the way i also told thames water that this low pressure problem has only occurred since a major fault at a thames water pumping station a few weeks ago, which resulted in E3 being without water. They said maybe the pump in my building needs to be reset etc.?...after such a major water failure in the area...regards Dimmy

Good luck. Why don't you register and tell us all the outcome.
 

Similar plumbing topics

  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
978
  • Question
I would suggest getting a G3 plumber in to...
Replies
9
Views
417
  • Question
Probably all off one main hence your problem...
Replies
3
Views
801
M
I have a viessman vitodens 222F combi storage...
Replies
0
Views
548
Max Hill
M
  • Question
Hi, We have solar panels for our hot water...
Replies
0
Views
648
Back
Top